|
Curtain
The curtain shall be constructed using specially extruded
interlocking aluminium slats of 25mm depth and 1.4mm thickness.
Nylon end clips shall be fitted to each alternate slat. Tapered
bottom rails can be manufactured upon request to suit the
opening (limitations may apply).
Finish
All aluminium sections can be natural anodised as standard.
Various anodising and powdercoat colours are also available
when specified.
Bottom Rail
The bottom rail shall be a specially extruded aluminium section
measuring 45mm high x 30mm complete with a continuous extruded
rubber seal.
Locking
Locking shall entail a centrally mounted, concealed key operated
“cam” lock mechanism. It shall be keyed on the
outside fitted onto the bottom rail of the Roller Shutter.
Master Key Locking System (Optional)
is available using either:
Lockwood 570; NOTE: The barrel protrudes out by approximately
25mm therefore considerations should be taken to avoid damage.
Lock Focus V9C4; with spin cylinder and sleek appearance with
lock protruding only 14mm.
Shootbolt System: Shootbolt system mechanism
is also available as an option, which is not concealed as
standard locks.
Operation
Designed for hand operation as standard. Chain operation and
motorisation are available as options, depending on application
(limitations may apply). See Method
of Operation.
Motorisation
See Industrial Operators.
PDF
DOWNLOADS
Series
25 Aluminium Roller Shutter
(.pdf format, get Adobe
Acrobat Reader)
Bulkhead_Aluminium
& Timber Roller Shutters (.pdf format, get
Adobe
Acrobat Reader)
Top
|
Light
and easy to operate